Tips For Cleaning The Flatbed Printer Nozzle

This article mainly introduces the method of cleaning the flatbed printer nozzle. The specific steps are as follows:

        1. Remove the flatbed printer nozzle and the nozzle filter together, and unscrew the plug of one of the exhaust pipes.

        2. Use a syringe to draw the cleaning solution from the end of the filter on the same side.

        3. The cleaning fluid and ink will flow out of the exhaust pipe.

        4. Repeat the operation several times until the liquid flowing out of the flatbed printer is transparent.

        5. Remove another tube of air, drain the residual liquid, and screw on the plug.

        6. Plug the UV printer exhaust pipe and then pump the cleaning fluid from the filter end.

        7. The cleaning fluid will flow out of the nozzle hole of the nozzle.

        8. Wait until the liquid flowing out of the orifice of the flatbed printer is transparent, and then enter the net residual liquid.

        Nine, use the same method to clean the other side of the UV printer.

        10. Finally, clean the nozzle with a clean, dust-free cloth.